User talk:Milton Beychok

 Where Milt lives it is approximately: 21:28

Welcome!

Welcome to the Citizendium! We hope you will contribute boldly and well. You'll probably want to know how to get started as an author. Just look at CZ:Getting Started for other helpful "startup" links, and CZ:Home for the top menu of community pages. Be sure to stay abreast of events via the Citizendium-L (broadcast) mailing list (do join!) and the blog. Please also join the workgroup mailing list(s) that concern your particular interests. You can test out editing in the sandbox if you'd like. If you need help to get going, the forums is one option. That's also where we discuss policy and proposals. You can ask any constable for help, too. Me, for instance! Just put a note on their "talk" page. Again, welcome and have fun! Roger Lohmann 21:51, 20 January 2008 (CST)

Milton - I've given a partial reply to your question over at Roger Lohmann's talk page. Welcome aboard! Anthony Argyriou 17:36, 21 January 2008 (CST)

CZ wikilinks

Milton- when adjusting links for CZ articles, please make the changes to the links within the article and not within the reference item. This way, if it's a 'redlink' then it will have enhanced visibility and might spurn article creation--if it's a 'bluelink', then it is more likely to be visited than if it was scuttled away in the depths of the references. --Robert W King 09:51, 29 January 2008 (CST)

Robert, thanks for the advice. I will do as you say in the future. - Milton Beychok 11:05, 29 January 2008 (CST)

Article on Garbage

Milton, I had started a stub about Garbage a few weeks ago, and given your background (I just noticed on the EPA page) would you be interested in contributing to it? --Robert W King 13:23, 31 January 2008 (CST)

Robert, thanks for asking me. I still have about eight or so articles lined up in my mind to do. And I really have no expertise in solid waste. So I think I will have to pass on your offer.

You have been in Citizendium since April 2007 and I've been here just for a few weeks. Perhaps you might take a brief look at the each of the seven articles that I have contributed (listed on my user page) and tell me what you think of them. - Milton Beychok 14:43, 31 January 2008 (CST)

Image size

Regarding Image:Motiva_Petroleum_Refinery.jpg, it's good to upload the largest version of the file available. It's more useful to reusers that way. :-) Stephen Ewen 02:43, 2 February 2008 (CST)

Stephen, my primary reason for having uploaded a cropped version of the photo was that I wanted to emphasize the pollution plume from the refinery's flare ... because the photo was to be used in the Air pollution dispersion terminology article.

When you revised my upload to the larger size, the flare's plume is now barely visible in the photo in that article ... which defeats my whole purpose for uploading the photo.

As a compromise, I would like to upload my version again under a different name (Image:Motiva Refinery Flare.jpg). In other words, there would be two versions available. Would that be agreeable with you? - Milton Beychok 10:40, 2 February 2008 (CST)

I replied here. Stephen Ewen 11:10, 2 February 2008 (CST)

Topic Informants Workgroup

Milt, I emailed you. Stephen Ewen 01:25, 3 February 2008 (CST)

Stephen, I have not recieved your email as yet. My address is mbeychok@cox.net. - Milton Beychok 01:56, 3 February 2008 (CST)

chemical images

Milton, send me a note for any of your excellent articles that you would like a chemical drawing of. I can whip them out in a few minutes for you. David E. Volk 13:28, 4 February 2008 (CST)

Thanks, David. When the need arises, I'll take you up on your offer. - Milton Beychok 15:32, 4 February 2008 (CST)

chemical engineering/chemistry

Dear Milton, if you would add [[Category: Chemistry Workgroup]] to your chemical engineering articles, I could help you in approving them, as I'm a chemistry editor. The CZ system is somewhat bureaucratic in that I cannot do it otherwise (although I have an MSc in chemical engineering from Delft University of Technology).--Paul Wormer 03:16, 5 February 2008 (CST)

Paul, thank you and I will add that category. - Milton Beychok 11:27, 5 February 2008 (CST)

can you point me in the right direction in learning about air pollution from long beach and la's ports?

Is it true that the majority of the smog causing particles / chemicals actually come from ships that cannot be easily regulated since they are considered to be in international waters?

Is 'playing-down-the-middle' Governator (so that he can win California US senator) going to address this issue?

I mainly find news sources for LA Smog problems; where would I find a good review paper on LA Smog? Where can I learn about political efforts and grass root campaigns which are trying to enact change?

Sorry that my comments are so biased and full of opinion (they will not appear on any article on smog related topics). Glad you are part of the CZ team and I look forward to reading all of your articles. Tom Kelly 01:25, 6 February 2008 (CST)

Tom, the best place you could seek such information would be from the Southern California Air Quality Management District (SCAQMD). Their website is at www.scaqmd.gov and there you will find their address and their contact information. I happen to think that they do a very good job and are very knowledgeable.

The biggest contributors by far to our smog problems in the LA basin are automotive vehicles (cars, busses and trucks). - Milton Beychok 01:58, 6 February 2008 (CST)

Thank you for your advice and insight. Tom Kelly 15:10, 6 February 2008 (CST)

Approval

Milton, I'm prepared to carefully read Petroleum refining processes and to approve it (maybe I will see fit to make some small changes, I don't know yet). However, before I do this you should know that approval has two disadvantages:

1. Your authorship becomes hidden, history will show Matt Innis and Larry Sanger as sole contributors. Personally I don't mind this, but some people do.
2. Your article will be locked, you cannot change anything anymore. For me this is the reason not to go for approval of my articles. I have one approved article, Van der Waals equation, and several times I felt the urge to change something in it, but couldn't.

To tell you the truth: I don't know any advantage of approval. Anyhow, let me know if you want me to approve Petroleum refining processes. Cheers --Paul Wormer 03:38, 6 February 2008 (CST)

Paul, changes are made to the draft and that become re-approved. Moreover, the history of contributors is preserved if the process is done correctly, e.g., see the history at Butler. Stephen Ewen 10:04, 6 February 2008 (CST)

Paul, the answer is yes. I would like you to participate in the approval process for Petroleum refining processes. Thanks very much, - Milton Beychok 11:42, 6 February 2008 (CST)

Milton, Matt answered your questions on my talk page.--Paul Wormer 07:56, 9 February 2008 (CST)

Congratulations! Keep them coming! [1] --D. Matt Innis 01:20, 10 February 2008 (CST)

Hi Milton, in reference to the good question you left on my talk page; yes, you've got the right idea, the draft and the approved version are now the same. From here, as contributers edit the draft, the approved version will remain he same. At some point, the entire process will repeat with an editor (or three, depending on the method) nominating that the draft replace the approved version. This can happen in the next few days or it may stay the same for months. I have found that there are occasionally some quick changes that get made in the next few weeks that update the approved page, then it pretty much remains stable from then on. You might also be interested to notice that the article that you were working on was 'moved' to the draft page rather than 'copied'. That way the history went with the draft so that, as the article progresses, the history remains the same from day one. --D. Matt Innis 19:10, 10 February 2008 (CST)

drawing

Milton, I sent you an e-mail with a stub of a drawing on <milt at air-dispersion dot com>. Did you get it?--Paul Wormer 06:53, 12 February 2008 (CST)

Paul, I got your email and I have responded by email. Thanks, Milton Beychok 13:42, 12 February 2008 (CST)

Milton I saw that you made a neat (and very small!) drawing. Apparently you are a very good computer draughtsman, so why did you ask for help? Maybe I can ask you next time I need a drawing? With regard to your number of articles, I don't think you can overdo it, the more the better. Remember CZ is not on paper, we don't take shelfspace (in households and libraries).--Paul Wormer 08:04, 18 February 2008 (CST)

Moving articles

Milton, you did work hard there! I agree that if we had a way to move all pages at the same time that would be great. That would be one of those technical jobs that is over my head, but post a note on the technical forum (check the list to the left <--). You might be able to hook up with someone that can make us something like that. User:Chris Day made the subpages, so he would likely be a good start as well. I think you could have moved all those pages and that should have been easier than copy and paste, but I am not sure. I have only done two or three and they were so far apart that I can't remember how I did it! But, it seems that moving should be easier.

As far as helping with downloading engineering articles, that would be awesome! Have you seen User:Anthony.Sebastian's project to get volunteers to help convert text for those that are not familiar with wiki mark-up? Also, make sure and leave a note at your workgroup [2] and on the engineering forum, though they are not that active right now. There have been lots of engineers that have been active and looking for other engineers, so maybe if you use the engineering mailing list and mass mail all of them, someone will be gald to hear from you and have something they need help with. nad there is always the blog (<---). I think with the energy you have, you might be able to stimulate some activity and really get the engineering workgroup running. Let me know if I can help along the way! D. Matt Innis 08:26, 21 February 2008 (CST)

In general, moving pages via cut-and-paste is really deprecated, as it separates the content from its history, and we probably really need to keep them together, for copyright legal reasons. J. Noel Chiappa 15:54, 25 February 2008 (CST)

Noel, as noted in Matt Innis's comment above, I copied-and-pasted ... I did not cut-and-paste. Regards, - Milton Beychok 16:04, 25 February 2008 (CST)

Either way, there is content in the new (pasted) location which is divorced from its detailed creation history record at the old location - and that is what I was concerned about. J. Noel Chiappa 16:32, 25 February 2008 (CST)

Volunteer wiki-converter

Milton, see: http://en.citizendium.org/wiki/User_talk:Anthony.Sebastian#Volunteer_to_convert_articles_emailed_in. --Anthony.Sebastian 14:50, 21 February 2008 (CST)

Chemistry style guide

Milton, I have started a chemistry style guide here [3]

please jump in with any thoughts you might have. It is a crude start to be refined over the next few weeks as I or others come up with new items to discuss. David E. Volk 17:56, 21 February 2008 (CST)

Gravitation

Milton we were bot working on the same article, sorry. --Paul Wormer 03:47, 26 February 2008 (CST)

Thanks, Paul, for simplifying the article as I had proposed. Now, it is 2 o'clock in the morning and I must get to bed. - Milton Beychok 04:01, 26 February 2008 (CST)

phosphorus approval

Milton, because User:Paul Wormer and I have both contributed significantly to the article phosphorus, we cannot approve it ourselves. Could you take a look at the phosphorus article and submit for the approval process. Paul or I could do it if we have a third person approve (if you don't know how the approval process works), otherwise you could approve it by yourself. Please take a look and send feedback. Thanks, David E. Volk 09:04, 26 February 2008 (CST)

In the CZ pages somewhere, it says that things generally known by experts in the field do not need to be referenced. Typically, references need really only be needed for contentious facts or areas of debate.

Accordingly, most of the information in this article is readily known by chemists and does not therefore need to be cited. However, I will read through the entire thing by Friday (too much to do right now) and double check our work. David E. Volk 12:36, 26 February 2008 (CST)

Does that means that any non-expert reading an article must take it on faith that the facts are correct? Can't say that I would agree with that. In any event, please let me know if what I must do to start the approval process on the MetaData template is correct as I listed on your Talk page. - Milton Beychok 12:51, 26 February 2008 (CST)

First, your approval text looks about right. You can find the exact procedure on the CZ:Approval process page, in the When and how to fill in the "ToApprove" metadata section. You can use five tildas to make the time stamp, for example.

As for the faith part, yes and no. This is meant to be an authoritative source, based on expert knowledge. Just like one would cite the Encyclopedia Britanica, they can site CZ. However, there is still a place for things on the Bibliography and External Links subpages for additional reference material of particular importance. The idea is that common knowledge of experts need not be cited, thus when a mathemetician asserts that 2(pi) radians = 360 degrees, no reference to the original source is needed because this is common knowledge. Likewise, the oxidation of phosphorus to phosphate does not need citations because it is common knowledge. In my interpretation, things that appear in every general chemistry book do not need citations, because that is just another expert writing down what he also knows. However, sometimes I use > 50 citations because it is very specialized information, like in this article List of Nuclear Magnetic Resonance experiments. David E. Volk 13:08, 26 February 2008 (CST)

David, I will mark my calendar to start the approval on Moday, March 3rd. That will give you time to read the article on Friday (as you said above) and make whatever changes you deem needed. If that is not okay, please let me know. - Milton Beychok 14:29, 26 February 2008 (CST)

Great, I did a speed through and noted some typos and grammar that still need fixing, and some things to consider references for. Thanks for your tweeks. David E. Volk 15:12, 26 February 2008 (CST)