User:John R. Brews/CZ psychology authors: Difference between revisions

From Citizendium
Jump to navigation Jump to search
imported>John R. Brews
No edit summary
No edit summary
 
(6 intermediate revisions by one other user not shown)
Line 1: Line 1:
==CZ psychology authors==
{{AccountNotLive}}
*[[User:John_Calvin_Moore]]
{{TOC|right}}
*[[User:Douglas_Griffith]]
{{Image|JFET.png|right|150px|JFET with n-type semiconductor body and p-type gate. Ohmic contacts are source (S), drain (D), and gate (G)}}
*[[User:Michael J. Formica]]
*[[User:Patrick Malone]]
*[[User:Richard Pettitt]]
*[[User:Michael S. Everhart]]
*[[Category:Psychology_Authors]]
http://www.charlierose.com/view/interview/11891


A '''junction field-effect transistor''' or JFET is a three-terminal device that conducts a current that can be controlled by an applied voltage. It is made of two [[semiconductor]] layers.


Before we conclude that clocks we perceive as moving actually run slower than clocks that appear stationary, so they count two events as taking less time if the clocks are moving, there is a wrinkle to examine. On the train, the light is sent and received at the same location, so the same clock records departure time and arrival time. On the track, though, the location of the flashlight changes with time, so two clocks are needed, one at the sending location and one at the receiving location. Can we be sure the two clocks are synchronized?
==Operation==
The figure shows a JFET with an ''n-''type body and a ''p-''type gate region. For a discussion of dopant impurities and the terminology ''p-'' and ''n-''type. see [[Semiconductor#Dopant_impurities|dopant impurities]].


To synchronize the clocks on the ground, a light beam is sent from one location to the other. Because light travels at speed ''c'', it will arrive at the other location a time ''L/c'' later. Thus, we set the distant clock to time ''L/c'' when the light arrives. That is the method for synchronizing separated clocks.
The dark-colored portion of the body is conducting, due to the electrons in this region, and is called the ''channel''. The light-colored portion of the body is depleted of electrons and is not electrically conducting.  


From the train however, these clocks are not synchronized. The distance ''L=vt'' used by the track observers is not the correct separation, which is a shorter distance ''vt' ''. Consequently, the distant clock is set to the wrong time of arrival for the synchronizing light, namely ''vt/c'' instead of ''vt'/c''=''vt √(1-''v''<sup>2</sup>/''c''<sup>2</sup>)/c''. Instead of ''L'', the track observers should have used ''L''√(1-''v''<sup>2</sup>/''c''<sup>2</sup>), the so-called ''Lorentz contraction'' of ''L''.
The n-type body in the figure conducts electricity when a voltage drop is applied between source and drain. The amount of current depends, among other things, upon the cross-section of the conducting channel. This cross section is controlled by the gate, which makes ohmic contact to the p-type region. If the gate-source [[Semiconductor diode|pn-junction]] is reverse biased by applying a negative voltage to the gate and holding the source at ground, the depletion region within the pn-junction widens, restricting the cross section of the conducting channel.
 
The insulating portion of the body varies in width from source to drain because the current through the body causes a voltage drop as suggested by [[Ohm's law]] that varies with distance and increases the amount of reverse bias between the gate and body as a function of distance down the channel.

Latest revision as of 04:07, 22 November 2023


The account of this former contributor was not re-activated after the server upgrade of March 2022.


(PD) Image: John R. Brews
JFET with n-type semiconductor body and p-type gate. Ohmic contacts are source (S), drain (D), and gate (G)

A junction field-effect transistor or JFET is a three-terminal device that conducts a current that can be controlled by an applied voltage. It is made of two semiconductor layers.

Operation

The figure shows a JFET with an n-type body and a p-type gate region. For a discussion of dopant impurities and the terminology p- and n-type. see dopant impurities.

The dark-colored portion of the body is conducting, due to the electrons in this region, and is called the channel. The light-colored portion of the body is depleted of electrons and is not electrically conducting.

The n-type body in the figure conducts electricity when a voltage drop is applied between source and drain. The amount of current depends, among other things, upon the cross-section of the conducting channel. This cross section is controlled by the gate, which makes ohmic contact to the p-type region. If the gate-source pn-junction is reverse biased by applying a negative voltage to the gate and holding the source at ground, the depletion region within the pn-junction widens, restricting the cross section of the conducting channel.

The insulating portion of the body varies in width from source to drain because the current through the body causes a voltage drop as suggested by Ohm's law that varies with distance and increases the amount of reverse bias between the gate and body as a function of distance down the channel.

Retrieved from "https://citizendium.org/wiki/index.php?title=User:John_R._Brews/CZ_psychology_authors&oldid=907111"