User:John R. Brews/CZ psychology authors: Difference between revisions

From Citizendium
Jump to navigation Jump to search
imported>John R. Brews
No edit summary
No edit summary
 
(7 intermediate revisions by one other user not shown)
Line 1: Line 1:
==CZ psychology authors==
{{AccountNotLive}}
*[[User:John_Calvin_Moore]]
{{TOC|right}}
*[[User:Douglas_Griffith]]
{{Image|JFET.png|right|150px|JFET with n-type semiconductor body and p-type gate. Ohmic contacts are source (S), drain (D), and gate (G)}}
*[[User:Michael J. Formica]]
 
*[[User:Patrick Malone]]
A '''junction field-effect transistor''' or JFET is a three-terminal device that conducts a current that can be controlled by an applied voltage. It is made of two [[semiconductor]] layers.
*[[User:Richard Pettitt]]
 
*[[User:Michael S. Everhart]]
==Operation==
*[[Category:Psychology_Authors]]
The figure shows a JFET with an ''n-''type body and a ''p-''type gate region. For a discussion of dopant impurities and the terminology ''p-'' and ''n-''type. see [[Semiconductor#Dopant_impurities|dopant impurities]].
http://www.charlierose.com/view/interview/11891
 
The dark-colored portion of the body is conducting, due to the electrons in this region, and is called the ''channel''. The light-colored portion of the body is depleted of electrons and is not electrically conducting.  
 
The n-type body in the figure conducts electricity when a voltage drop is applied between source and drain. The amount of current depends, among other things, upon the cross-section of the conducting channel. This cross section is controlled by the gate, which makes ohmic contact to the p-type region. If the gate-source [[Semiconductor diode|pn-junction]] is reverse biased by applying a negative voltage to the gate and holding the source at ground, the depletion region within the pn-junction widens, restricting the cross section of the conducting channel.
 
The insulating portion of the body varies in width from source to drain because the current through the body causes a voltage drop as suggested by [[Ohm's law]] that varies with distance and increases the amount of reverse bias between the gate and body as a function of distance down the channel.

Latest revision as of 04:07, 22 November 2023


The account of this former contributor was not re-activated after the server upgrade of March 2022.


(PD) Image: John R. Brews
JFET with n-type semiconductor body and p-type gate. Ohmic contacts are source (S), drain (D), and gate (G)

A junction field-effect transistor or JFET is a three-terminal device that conducts a current that can be controlled by an applied voltage. It is made of two semiconductor layers.

Operation

The figure shows a JFET with an n-type body and a p-type gate region. For a discussion of dopant impurities and the terminology p- and n-type. see dopant impurities.

The dark-colored portion of the body is conducting, due to the electrons in this region, and is called the channel. The light-colored portion of the body is depleted of electrons and is not electrically conducting.

The n-type body in the figure conducts electricity when a voltage drop is applied between source and drain. The amount of current depends, among other things, upon the cross-section of the conducting channel. This cross section is controlled by the gate, which makes ohmic contact to the p-type region. If the gate-source pn-junction is reverse biased by applying a negative voltage to the gate and holding the source at ground, the depletion region within the pn-junction widens, restricting the cross section of the conducting channel.

The insulating portion of the body varies in width from source to drain because the current through the body causes a voltage drop as suggested by Ohm's law that varies with distance and increases the amount of reverse bias between the gate and body as a function of distance down the channel.