Difference between revisions of "Phosphorus"

From Citizendium
Jump to: navigation, search
m (keep intro simple, i.e. What is it? Where is it? Why is it? Then detail.)
(hydroxyapatite - preferred spelling?)
Line 20: Line 20:
  
 
'''Phosphorus''' is a chemical [[element]] with the [[atomic number]] Z = 15. Unlike other elements in group VA of the [[periodic table]], phosphorus is never found as a pure element in nature, but only in combination with other elements. It is present in all living organisms   
 
'''Phosphorus''' is a chemical [[element]] with the [[atomic number]] Z = 15. Unlike other elements in group VA of the [[periodic table]], phosphorus is never found as a pure element in nature, but only in combination with other elements. It is present in all living organisms   
in the form of [[organophosphate]]s and as calcium phosphates such as [[hydroxyapetite]] (Ca<sub>10</sub>(PO<sub>4</sub>)<sub>6</sub>(OH)<sub>2</sub>) and [[fluoroapatite]] (Ca<sub>10</sub>(PO<sub>4</sub>)<sub>6</sub>F<sub>2</sub>), substances found in teeth and bones.  Many cell signaling cascades in living organisms operate by a series of phosphorylation events in which a phosphate group (PO<sub>4</sub>)<sup>2&minus;</sup> is either added to a protein by a [[kinase]] or removed from a protein by a [[phosphorylase]].   
+
in the form of [[organophosphate]]s and as calcium phosphates such as [[hydroxyapatite]] (Ca<sub>10</sub>(PO<sub>4</sub>)<sub>6</sub>(OH)<sub>2</sub>) and [[fluoroapatite]] (Ca<sub>10</sub>(PO<sub>4</sub>)<sub>6</sub>F<sub>2</sub>), substances found in teeth and bones.  Many cell signaling cascades in living organisms operate by a series of phosphorylation events in which a phosphate group (PO<sub>4</sub>)<sup>2&minus;</sup> is either added to a protein by a [[kinase]] or removed from a protein by a [[phosphorylase]].   
  
 
Both [[red phosphorus]] and [[tetraphosphorus trisulfide]] are used in common matches because they are easily ignited by heat.  However, the [[agriculture|agricultural industry]] is the largest user of phosphorus in the form of [[fertilizer]]s.  The radioactive isotope <sup>32</sup>P is used to radiolabel compounds for scientific studies.  Phosphorus and arsenic share many chemical properties.
 
Both [[red phosphorus]] and [[tetraphosphorus trisulfide]] are used in common matches because they are easily ignited by heat.  However, the [[agriculture|agricultural industry]] is the largest user of phosphorus in the form of [[fertilizer]]s.  The radioactive isotope <sup>32</sup>P is used to radiolabel compounds for scientific studies.  Phosphorus and arsenic share many chemical properties.

Revision as of 21:52, 1 January 2008

This article has a Citable Version.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
Isotopes [?]
MSDS [?]
Properties [?]
 
This editable Main Article has an approved citable version (see its Citable Version subpage). While we have done conscientious work, we cannot guarantee that this Main Article, or its citable version, is wholly free of mistakes. By helping to improve this editable Main Article, you will help the process of generating a new, improved citable version.
Phosphorus
30.973761(2) +3
+5
0
-3
  P
15
1s22s22p63s23p3
[ ? ] Non-Metal:
Properties:
allotropic
Compounds:
Oxides, oxyacids, halides
Uses:
Vital to life; drying agents; strong acids;fertilizers
Hazard:
flammable, toxic


Phosphorus is a chemical element with the atomic number Z = 15. Unlike other elements in group VA of the periodic table, phosphorus is never found as a pure element in nature, but only in combination with other elements. It is present in all living organisms in the form of organophosphates and as calcium phosphates such as hydroxyapatite (Ca10(PO4)6(OH)2) and fluoroapatite (Ca10(PO4)6F2), substances found in teeth and bones. Many cell signaling cascades in living organisms operate by a series of phosphorylation events in which a phosphate group (PO4)2− is either added to a protein by a kinase or removed from a protein by a phosphorylase.

Both red phosphorus and tetraphosphorus trisulfide are used in common matches because they are easily ignited by heat. However, the agricultural industry is the largest user of phosphorus in the form of fertilizers. The radioactive isotope 32P is used to radiolabel compounds for scientific studies. Phosphorus and arsenic share many chemical properties.

Production of elemental phosphorus

Calcium phosphate (phosphate rock), mostly mined in Florida and North Africa, can be heated to 1200-1500 Celcius with sand, which is mostly SiO2, and coke (impure carbon) to produce vaporized tetraphosphorus, P4, (mp. 44.2 C) which is subsequently condensed into a white power under water to prevent oxidation. Even under water, white phosphorus is slowly converted to the more stable red phosphorus allotrope (mp. 597C). Both the white and red allotropes of phosphoruus are insoluble in water.

Fertilizers

Due to the essential nature of phosphorus to living organisms, the low solubility of natural phosphorus-containing compounds, and the slow natural cycle of phosphorous, the agricultural industry is heavily reliant on fertilizers which contain phosphate, mostly in the form of superphosphate of lime. Superphosphate of lime is a mixture of two phosphate salts, calcium dihyrogen phosphate (Ca(H2PO4)2) and calcium sulfate dihydrate CaSO4•2H2O produced by the reaction of sulfuric acid and water with calcium phosphate.

Allotropes of phosphorus

(CC) Image: David E. Volk
Structure of white phosphorus.

Both phosphorus and arsenic have many allotropes, but only the white and red forms predominate.

  • White phosphorus and yellow arsenic both have four atoms arranged in a tetrahedral structure in which each atom is bound to the other three atoms by a single bond. This form of the elements are the least stable, most reactive, more volatile, less dense, and more toxic than the other allotropes. The toxicity of white phosphorus lead to its discontinued use in matches.
  • Red phosphorus: here one of the bonds in P4 described above has been broken, and one additional bond is formed with a neighboring tetrahedron.
  • Black phosphorus is made of even larger aggregates. P2, which contains a triple bond and is analogous to N2, is stable only at high temperatures.

Chemical bonding

CC Image
Valence states of phosphorus

Since phosphorus is just below nitrogen in the periodic table the two elements share many of their bonding characteristics. For instance the molecule phosphine, PH3, is the analogue of ammonia, NH3. Phosphorus, as nitrogen, is trivalent in this molecule,

}}

This is the pre-quantum mechanical Lewis structure, which although somewhat of a simplification from a quantum chemical point of view,[1] illustrates some of the distinguishing characteristics. The unpaired electrons in the 3p orbitals bind with those in the hydrogen 1s orbitals to form electron pairs of opposite spin. The electron pair in the phosphorus 3s orbital shows up as a lone pair in the Lewis structure.

The phosphorus cation is very similar to the nitrogen cation. In the same way as nitrogen in the ammonium ion, the phosphorus ion in the phosphonium iodide PH4+⋅⋅⋅I is quadruvalent,

The main difference in the bonding properties of nitrogen and phosphorus is the fact that the valence (n = 3) shell of phosphorus has d-orbitals. The valence (n = 2) shell of nitrogen does not have these (see hydrogen-like atoms). It costs relatively little energy to promote an electron within a shell, e.g., a 3s electron to a 3d orbital. This gives the P-atom five unpaired electrons and makes it pentavalent. The phosphorus chloride molecule is an example,

With strongly electronegative ions, in particular fluorine, hexavalency as in PF6 occurs as well. This octahedral ion is isoelectronic with SF6. In the bonding the six octahedral sp3d2 hybrid atomic orbital play an important role.

Phosphine, diphosphine and phosphonium salts

Phosphine (PH3) and arsine (AsH3) are structural analogs with ammonia (NH3) and form pyramidal structures with the phosphorus or arsenic atom in the center bound to three hydrogen atoms and one lone electron pair. Both are colorless, ill-smelling, toxic compounds. Phosphine is produced in a manner similar to the production of ammonia. Hydrolysis of calcium phosphide, Ca3P2, or calcium nitride, Ca3N2 produce phosphine or ammonia, respectively. Unlike ammonia, phosphine is unstable and it reacts instantly with air giving off phosphoric acid clouds. Arsenic is even less stable. Although phosphine is less basic than ammonia, it can form a few some phosphonium salts (PH4I), analogs of ammonium salts, but these salts immediately decompose in water and do not yield PH4+ ions. Diphosphine (P2H4 or H2P-PH2) is an analog of hydrazine (N2H4) that is a colorless liquid which spontaneously ignites in air and can disproportionate into phosphine and complex hydrides.

Phosphorus halides

The trihalides PF3, PCl3, PBr3 and PI3 and the pentahalides PF5, PCl5 and PBr5 are all known and mixed halides can also be formed. The trihalides can be formed simply by mixing the appropriate stoichiometric amounts of phosphorus and a halide. For safety reasons, however, PF3 is typically made by reacting PCl3 with AsF5 and fractional distillation because the direct reaction of phosphorus with fluorine can be explosive. The pentahalides, PX5, are synthesized by reacting excess halide with either elemental phosphorus or with the corresponding trihalide. Mixed phosphorus halides are unstable and decompose to form simple halides. Thus 5PF3Br2 decomposes into 3PF5 and 2PBr5.

Phosphorus oxides (acid anhydrides)

Phosphorus(III)oxide, P4O6 (also called tetraphosphorus hexoxide) and phosphorus(IV) oxide, P4O10 (or tetraphosphorus decoxide) are acid anhydrides of phosphorus oxyacids and hence readily react with water. P4O10 is a particularly good dehydrating agent that can even remove water from nitric acid, HNO3. The structure of P4O6 is like that of P4 with an oxygen atom inserted between each of the P-P bonds. The structure of P4O10 is like that of P4O6 with the addition of one oxygen bond to each phosphorus atom via a double bond and protruding away from the tetrahedral structure.

Phosphorus oxyacids

Phosphorous oxyacids can have acidic protons bound to oxygen atoms and nonacidic protons which are bonded directly to the phosphorus atom. Although many oxyacids of phosphorus are formed, only six are important (see table), and three of them, hypophosphorous acid, phosphorous acid and phosphoric acid are particularly important ones.


Oxidation StateFormulaNameAcidic ProtonsCompounds
+1 H3PO2 hypophosphorous acid 1 acid, salts
+3 H3PO3 (ortho)phosphorous acid 2 acid, salts
+5 (HPO3)n metaphosphoric acids n salts (n=3,4)
+5 H5P3O10 triphosphoric acid 3 salts
+5 H4P2O7 pyrophosphoric acid 4 acid, salts
+5 H3PO4 (ortho)phosphoric acid 3 acid, salts

Widely used phosphorous compounds

Phosphorous compoundUse
Ca(H2PO4)2•H2OBaking powder & fertilizers
CaHPO4•2H2OAnimal food additive, toothpowder
H3PO4Manufacture of phosphate fertilizers
PCl3Manufacture of POCl3 and pesticides
POCl3plasticizer Manufacturing
P4S10Manufacturing of additives and pesticides
Na5P3O10Detergents

Isotopes of phosphorus

Although twenty three isotopes of phosphorus are known (all posibilities from 24P up to 46P), only 31P, with spin 1/2, is stable and is therefore present at 100% abundance. The half-integer spin and high abundance of 31P make it useful for nuclear magnetic resonance studies of biomolecules, particularly DNA.

Two radioactive isotopes of phosphorous have half-lives which make them useful for scientific experiments. 32P has a half-life of 14.262 days and 33P has a half-life of 25.34 days. Biomolecules can be "tagged" with a radio isotope to allowed for the study of very dilute samples.


Biological membranes and phospholipids

(CC) Image: David E. Volk
Structure of a generic saturated phospholipid. Often n=10,12,14,16,18 and 22.

All cells must have a membrane that distinguishes it from the cell's surrounding. Biological membranes are made from a phospholipid matrix and proteins, typically in the form of a bilayer. Phospholipids are derived from glycerol, such that two of the glycerol hydroxyl (OH) protons have been replaced with fatty acids as an ester, and the third hydroxyl proton has been replaced with phosphate bonded to another alcohol.

History

Phosphorus was discovered by the Hamburg alchemist Hennig Brand in 1669. He made it out of human urine. He let urine stand for days until it gave off a terrible smell. Then he boiled it down to a paste, heated this paste to a high temperature, and led the vapors through water where he hoped they would condense to gold. Instead, he obtained a white, waxy substance that glowed in the dark. Brand had discovered phosphorus, the first element discovered since antiquity. The word phosphorus comes from the Greek (φως = light, φορέω = carry) and means light carrier. We now know that Brand produced ammonium sodium hydrogenphosphate (NH4)NaHPO4.

Brand at first tried to keep the method secret, but later sold the recipe for 200 thaler to somebody from Dresden, Krafft, who could now make it as well, and toured much of Europe with it, including England, where he met with Robert Boyle. The secret that it was made from urine leaked out and first Johann Kunckel (1630-1703) in Sweden (1678) and later Boyle in London (1680) also managed to make phosphorus. Boyle states that Krafft gave him no no information as to the preparation of phosphorus other than that it was derived from "somewhat that belonged to the body of man". This gave Boyle a valuable clue, however, so that he, too, managed to make phosphorus. Later he improved Brand's process by using sand in the reaction (still using urine as base material),

4NaPO3 + 2SiO2 + 10C → 2Na2SiO3 + 10CO + P4

Robert Boyle was the first to use phosphorus to ignite sulphur-tipped wooden splints, forerunners of our modern matches, in 1680.

In 1769 Johan Gottlieb Gahn and Carl Wilhelm Scheele showed that calcium phosphate (Ca3(PO4)2) is found in bones and they obtained phosphorus from bone ash. Antoine Lavoisier recognized phosphorus as an element in 1777. Bone ash was the major source of phosphorus until the 1840s. Phosphate rock, a mineral containing calcium phosphate, was first used in 1850 and following the introduction of the electric arc furnace in 1890 this became the only source of phosphorus. Phosphorus, phosphates and phosphoric acid are still obtained from phosphate rock. Phosphate rock is a major feedstock in the fertilizer industry.

Glow of phosphorus

In the dark pure white phosphorus glows, which explains the name of the element. This greenish glow greatly fascinated the discoverers of the element. The phenomenon phosphorescence has been named after it. Phosphorescence is the slow decay of a metastable electronic state to a lower state under emission of light. The decay is slow because the transition from the excited to the lower state is forbidden, usually because it requires a spin flip. Often it involves a transition from an excited spin-triplet state to a ground state that is a spin-singlet. The metastable excited state may have been populated by thermal excitations or some light source. Since phosphorescence is slow, it persists for some time after the exciting source is removed.

It is only natural to assume that the name giver exhibits the phenomenon named after it. However, this is not the case. The glow of pure phosphorus is due to another phenomenon, namely chemiluminescence. This occurs when some product molecules of a chemical reaction leave the reaction in an electronically excited state. When the transition from the excited state to the ground state is forbidden, decay of the product molecule(s) will be slow. The frequency (color) of the light emitted is proportional to the energy difference of the two electronic states involved, as Niels Bohr discovered in the early days of quantum mechanics (1913).

Robert Boyle already knew that air was required to make phosphorus glow, so in fact it has been clear since its discovery that phosphorus does not phosphorescence but chemiluminescense. However, the exact chemical reaction that caused it was not known until 1974[2] when it was shown that the excited molecule HPO and the dissociating excited dimer (PO)2 are the originators of the green glow. The molecules HPO and PO are formed by the oxidization of white phosphorus in the presence of air and water.

Note and reference

  1. In quantum chemical valence bond theory one usually works with mixtures of s and p atomic orbitals, so-called hybrids
  2. R. J. van Zee and A. U. Khan, Journal American Chemical Society, vol. 96, p. 6805 (1974)