Superheterodyne

From Citizendium
Revision as of 12:48, 30 March 2024 by John Leach (talk | contribs)
Jump to navigation Jump to search
This article may be deleted soon.
To oppose or discuss a nomination, please go to CZ:Proposed for deletion and follow the instructions.

For the monthly nomination lists, see
Category:Articles for deletion.


This article is a stub and thus not approved.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
 
This editable Main Article is under development and subject to a disclaimer.

The superheterodyne technique, in radio communications, converts information at a low frequency to a high frequency suitable for transmission. On reception, it reverses the process. Typically, there is one or more intermediate frequencies between the transmission and user information frequencies.

It uses a principle that if two signals are combined in an electronic circuit known as a mixer, the mixer will output the two signals, their sum, and their difference. On reception, the sum or difference contains the information to be extracted. Assuming amplitude modulation, the information in the modulated signal came from the sum and difference between the beat frequency from the local oscillator, and the known unmodulated carrier frequency.

For transmission, the beat frequency is the carrier frequency to be modulated, and all or part of the mixer output is amplified and connected to the transmitting antenna.