End office

From Citizendium
Revision as of 01:24, 13 December 2008 by imported>Howard C. Berkowitz (New page: In conventional wired telephony, an end office is the service provider location at which the local loop wiring from customer premises physically terminated, converted into digital ...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

In conventional wired telephony, an end office is the service provider location at which the local loop wiring from customer premises physically terminated, converted into digital signals if not already in digital form, and sent to a telephone circuit switch. That switch can "hairpin" calls back to local loops if the destination is served by the same end office. More commonly, the switch puts telephone calls onto multiplexed transmission facilities, either at a peer level (i.e., within the same local calling area) or to hierarchically higher switches that interconnect local calling areas, regions inside a country, and internationally.

While some end office switches, as for rural locations, may only be able to connect to hundreds or low thousands of line, it is relatively common for a switch to be able to terminate 10,000 local lines. There may be multiple switches in an end office building, but, for reasons of fault tolerance, more than 50,000 lines rarely terminate in the same physical end office.

With convergence of communications, the same basic functions of multiplexing, switching, and demultiplexing take place, but the switch is all digital. The subscrier local loops are digital and also carry television and data service.